beaded bracelet Bracelets - jewelry, which, perhaps, neverwill not go out of fashion. They weave from a variety of materials, using a variety of techniques. The most popular product for making jewelry with your own hands is beads. Using different in the shades and forms of elements, you can create each time a unique work.

Double-row flat bracelets of beads by own hands

For a case you will need:

  • The faceted Czech beads in 4 mm (84 pieces). Use of a product of a different type is possible, but note that some deviations from the instruction are possible. For convenience, let us designate this material as the letter "A".
  • The faceted beads are 3 mm (126 pcs.). Choose the color yourself. Denote the product by the letter "B".
  • Beads (the size is 15/0). In the scheme we will call it the letter "B".
  • Needle for beading.
  • A thread.
  • Clasp.
  • The work can be divided into 4 steps:

  • First create the first row. To do this, take two beads "A" and place them on the thread. Then string five elements "B", one "B" and five "B". Pull the needle through the two granules of "A" from below so that a loop is obtained; pull the thread well. Again, put on 5 beads "B", one - "B" and again 5 - "B". Stretch the needle through two granules of "A", you will get another loop (but already for the other side).
  • After one element is "A", five is "B", one- "B" and five - "B"; stretch the needle through the bottom of the two upper beads "A"; A loop is obtained to the right of the center of the system. Pay attention, bracelet, what you do with your own hands on this technology, has the front and the underside. Dial five elements "B", one - "B" and five - "B", make a loop the same, but already on the left side; Repeat the manipulation until you reach the desired length.
  • Now proceed with the second row! Cut a thread 2.5 m long, pull it into the needle; leave about 25 cm on the clasp. String two elements "A" on the thread; after do all that is described in the first step. "Put on" 5 elements "B", one - "B" and five - "B", stretch the thread through the bottom of all the beads "A", forming a loop on the right. Next, it's about connecting the parts of the system: put on the needle four beads "B"; stretch the needle through the first element "B" of the first row, and after through two beads, adjacent to it on the left and right. Put four "B" again; Stretch the needle through two "A" elements, from which the second row began to form. Continue this method to weave the second row.
  • Now attach the fastener to your bracelet. The standard mechanism is fixed as follows: in the needle, thread one end of the thread (four in all), string 10 beads "B" and pull the needle through the ring. Then thread the needle through the two upper "A" elements. To strengthen the new bracelets, fasten the loop again with a thread and tie the knot. Perform the same manipulation with the remaining free ends of the thread.
  • double row bracelet from beads

    Bracelets made of beads make by themselves: "Sea waves"

    Make bracelets with your own hands using the technology of "Sea Waves" is quite simple. To do this you will need:

  • Bugle - 126 pieces, size - 3. (A)
  • Beads the size of 11/0 of three colors (for example, mint (B), emerald (B), blue-green (D).
  • Beads Miyuki, size - 15/0 (D).
  • A thread.
  • Needle.
  • Clasp.
  • Each part consists of fourteen rows. Beads "B" will be needed for the rows from 10 to 14, "B" - from 5 to 9, and "G" - from 1 to 4. In the first part, to connect the "ladder", use the "G" elements. The whole work can be divided into three stages:

    • Start with the ladder! Take the two "A" elements, stretch the needle with the thread through the bottom hole of the second and the top - the first bead, the same way, join the next 12 pellets. Then string one "G" and two - "A"; start making a "ladder" of 14 beads. All "ladder" should organize V-shaped. The bracelets will consist of nine parts.
    • Create a series! They will be:
  • 14 row - 16 elements of "B";
  • 13th row - 15 "B";
  • 12 - 14 "B";
  • 11 - 13 "B";
  • 10 - 12 "B";
  • 9 - 10 "B";
  • 8 - 8 "B";
  • 7 - 7 "B";
  • 6 - 6 "B";
  • 5 - 5 "B";
  • 4 - 4 "G";
  • 3 - 3 "G";
  • 2 - 2 "G";
  • 1 - 1 "G".
  • Elements fill the formed zigzags. 16 elements "B" type on the thread, stretch the needle through the upper (14th) granule "A". Draw the needle into the 13th bead of the "ladder". After stringing 15 pieces of the "B" format, drag through the (13th) element of the opposite "ladder"; fill the whole space.

    • Time is for the fastener! The method is the same as in the previous version. The finished decoration looks great on the arm.

    beautiful beaded bracelet with your own hands

    What else can you do with your own hands?

    Learning to make bracelets from beads, you canmaster the techniques devoted to the creation of clothing items, pleasant little things to relatives, so you, without spending a lot of time investing your soul, will be able to save more. Having mastered the work with beads, go to:

  • Leather products, they are especially in harmony with the style of Casual. Crafts made of this material are durable and versatile.
  • Bracelets from ribbons will complement the romantic image, they are very popular among teenagers. By the way, often make jewelry from beads in tandem with ribbons.
  • Paracord is now used not only in aviation, but also in hand-made.
  • A bracelet made of nuts is a non-standard option for creative people.
  • Nowadays, weaved from beads, stones andall sorts of alloy metal products can rightly be called one of the most fashionable accessories in everyday life, because they perfectly emphasize the elegance of the girl and her style. In addition, a thing made by your own hand will delight you every day, since your product is unique, you will never find anything like this in another woman, which is so nice.

    Comments

    comments