black leather bracelet Beautiful jewelry can be bought not only instore, but also make them yourself. Leather bracelets are especially easy and quick to make. To start making jewelry, you need to find some old leather belts and leather jackets. This is a great material that can be cut into thin leather strips. Soon you will be able to easily create these leather masterpieces. There are several options for making such bracelets.

Braid

It looks like a pigtail.These bracelets are most often very beautiful in pairs, for both hands, so we recommend weaving several of them at once. To make jewelry, you can buy a leather blank or make it yourself. You need to cut a wide leather strip along two lines, putting buttons on the ends, using an awl. After that, you can start weaving. The lower end of the bracelet should be threaded between three threads in turn, straightening the twisted strips for a plane.bracelet with stones

For summer walks

These DIY leather bracelets are made from pastel lavender flowers. They go very well with summer and spring outfits. For this you will need:

  • Light green, white, lavender threads, each of which has a length of 40 cm;
  • A strip of white leather with a length of 40 cm;
  • Several silver chains are about 20 cm long;
  • Cover with clasp, made of silver;
  • Glue with scissors.

Stages of implementation:

  • Cut the thread into 9 pieces, each 20 cm to get two threads of each color, and a silver chain. Lay them out three in each group, as in the example. Fix the edges of the bands;
  • We begin the weaving itself. To make the pattern uniform, make sure that in the middle of each strand there are colored threads;
  • Once the end is close, you need to fix the thread before cutting off the ends. Then fasten the fasteners to the ends of the bracelet with glue;
  • In the event that the bracelet is a bit short, you can extend it with a chain.
  • bracelet with rivets

    Bracelet in bed colors

    To make such accessories you needsewing machine skills will come in handy. This particular version is made in white and pink, but you can always let your imagination run wild by choosing a different color scheme. To work, you need to prepare:

  • Knife and scissors;
  • A segment of white skin, having a size of 3x25 cm;
  • Pink thick fabric;
  • Ruler;
  • Hooks;
  • The sewing machine.
  • It is necessary to cut the skin so that it turns out9 strips, 0.33 cm wide. Then you need to divide the strips into three parts, braiding. After that you will need to fold the pink fabric as shown in the picture and sew it to the skin. Finally, we fix the hooks.bracelets with clasps

    Braided Bracelet

    These bracelets are very different fromabove, because braids were not used in their weaving. We measure our hand, then calculate the length of the strips, two of them will be needed. In addition, it is worth stocking up on coarse thread.

    Complex bracelet

    This type of accessories has many good elements in the form of braided braids, chains and stones. It is recommended to carefully prepare for the process. The following elements will be needed:

  • Pins, thread, needles;
  • Knitted fabric;
  • Roulette or ruler;
  • Scissors;
  • Thin metal chain;
  • Cord from leather;
  • Two fasteners;
  • Two beads made of wood;
  • Jewelery pliers.
  • If you follow all the instructions, thenget a good result. Also, do not forget to measure your wrist at the thumb, that is, at the widest point. It is better to do this before starting the process. This will give you the opportunity to make the length of the bracelet as comfortable as possible.

    Comments

    comments