This screen is suitable for zoning elongated inthe length of the hallway. The decoration works are preceded by the creation of two blanks for which a shield (2 × 0.8 m) of chipboard and a base (1.8 × 0.5 × 0.5 m) on castors will be needed. You will also need wallpaper, hanging steel railing (IKEA), white plastic slats, wallpaper glue, white acrylic paint, a can of white automotive paint, wooden frames, fine-grained sandpaper, metal corners, decorative nails, a hammer, a roller.
Hanger in the hallway
- Photo 1.2. On the one hand, the screen is an exposition of paintings, and on the other, a convenient storage system for the top, bags and other things needed in the hallway.
- Photo 3, 4. Wallpaper wallpaper and the front side of the shield are applied with wallpaper glue in a thin layer. After waiting some time, the canvases are attached to the shield, carefully combining the pattern at the junction of the two canvases.
- Photo 1. Wallpaper wallpaper and the front side of the shield are applied with wallpaper glue in a thin layer. After waiting some time, the canvases are attached to the shield, carefully combining the pattern at the junction of the two canvases.
- Photo 2. The back side of the shield is cleaned and smoothed with sandpaper. The surface of the workpiece must be flat. Then put white acrylic paint.
- Photo 3. To make the ends of the screen look neat, white plastic slats are nailed around the perimeter of the screen with decorative nails.
- Photo 4. The base and shield are connected by corners, fixed with screws. Screw steel railing.
- Photo 1. The base and shield connect the corners, fixed with screws. Screw steel railing.
- Photos 2, 3. Metal corners and steel rails are covered with white automotive spray paint.
- Photo 4. Wooden frames of different shapes and sizes are covered with white automotive paint. While they are drying up, you can pick up pictures. Then the images in frames are hung from the outside of the screen. The work is done.
