"Inaccessible" heated towel rail
How to make repairs in the bathroom1. "The Dark Kingdom." In addition to the upper beam necessary to provide local illumination of the mirror (very comfortable with mirrors integrated top and bottom illumination). If there is a separate shower, it is necessary that she was also featured in the bathroom - this often zabyvayut.2. "Inaccessible" heated towel rail. Usually it is placed near the wall next to the shower. But if the hinges are located on the side of the wall, then when you open the towel are behind the door! 3. Too high or low hanging sink. As a rule, the installation of a shell is designed for people 1.65-1.80 cm. If the growth of family members is greater, it makes sense to set it higher, and vice versa. Keep in mind that each washbasin has its own mounting height. Some manufacturers point it to their sites. Others do not. Therefore, before you remove the pipes, determine the model of the shell. Invalid calculation. When deciding how many tiles you need, remember that you need to purchase it with a margin. After all, elements in the last rows will have to be filed. If you put the tiles in horizontal rows, the "surplus" should be at least 10%, if at an angle of 45 degrees - 15%. Do not dispose of the leftovers after the repair. Over time, the tile may burst or crack when replacing the heated towel rails, and it is possible that the collection you need is already out of production by that time. Excessive trust in the manufacturer. When ordering a tile, do not be lazy to take a sample and measure it. Very often on the site or on the box there is one size, but in reality it turns out to be different! At first glance the deviation of 2 mm is a trifle. But in the row of 10-20 tiles the difference will be very significant. Such errors, alas, happen even with respectable manufacturers.
