If you are already full of cabinets, but things,randomly scattered around the apartment, does not become less - it is worth buying a shelf. Open storage systems allow you to put in order in the house, while not too cluttering up the space of the room. Moreover, the choice of such furniture is very wide. There are also quite neutral models, suitable for almost any style, and original design developments that can completely subordinate the interior.
Furniture racks
Doors protect objects from dust and, in addition, allow to disrupt the monotony of the shelves. Lur system from Nueva Linea
The rack, assembled from modular elements, is moreall is similar to the usual "wall". The composition is based on the Victoria program from Odalia. Ready-made shelvesWe sell as separate, independent models: for example, the Ivar rack (IKEA, Sweden) and the Amari-50 interior separator (BoConcept, Denmark), and the modular programs: for example, "Alexandria" from "Shatura-furniture", "Valencia" from "Europe", "Elika-02" from "Artis-XXI century" (all - Russia). The material for their production is wood, chipboard or MDF. Finish - varnish and paint or laminate and veneer. The cheapest IKEA products will cost. Hardly expensive will be the products of Russian factories. So, the said rack "Ivar", the dimensions of which (W x D x H) - 89 x 30 x 179 cm, costs 2,450 rubles. And the furniture similar to it from the Elika-02 line is 5 940 rubles. Designer models If you are ready for experiments - such models are for you. Designers (mostly Italian factories) make racks similar to columns (Orbit from Bonaldo), origami figures (Festival from Cattelan Italia), tropical plants (Akto from Oasis). Experiments are also being conducted with materials. In addition to wood, chipboard and MDF, metal, thermoplastic, and glass are used. Obviously, if you want, you do not want to, but such unusual furniture, which also has a bright accent color, will have to be made a fundamental element of the situation. As far as it is necessary - you decide. By the way, designer racks are estimated accordingly - in 55 thousand rbl. and more. The amount is quite large, and, perhaps, it is much more logical and rational to dispose of it differently. For example, to buy a rack is simpler, but larger. 
The program can include non-load-bearing vertical partitions, which also provide for a permutation. The People program from Pianca (Italy)
The dimensions of the finished shelves can be very different. Racking Festival from Cattelan Italia
Casing furnishings are easy to assemble inthe desired composition. Shelving from the collection of Melody from Dyatkovo Modular systems The rack can be assembled from open hanging shelves or modules, however, in this case it is necessary to first ascertain the load-bearing capacity of the wall. By operating a certain set of parts, you can independently model yourself or under the guidance of a specialist from the furniture salon you rack from a certain number of modules offered by the manufacturer. Subsequently, the layout of the components can change, the number of modules to increase or, conversely, decrease. During the discussion of the order the buyer is free to vary not only the number of parts and their "style" (the presence of swinging or sliding doors and drawers), but also the finish. True, the choice of design options will not be too broad. For example, for modules from the Oktava series (Dyatkovo, Russia) there are only two options for finishing - maple and cherry, for shelving from the Victoria line (Odalia, Russia) - light oak and dark walnut, for the NOVAcia program (Nova, Russia) similarly. But there is always the opportunity to "play" with the material and color of the doors. They are made of veneered chipboard, as well as a clear, matt or colored tempered glass. 
If the rack is the main subject of the situation, it is better to add boxes and doors. A composition based on the Victoria program from Odalia
In the nurseries and living rooms, the rack can be used as a non-load-bearing partition wall. Model from Oktava collection from Dyatkovo
For greater stability, the partition wallIt can be fixed with vertical racks attached to the ceiling. Model Norrabu from IKEA Another option, if the series consists not of the housing modules, but of vertical guides and various shelves and boxes. Swing doors or sliding doors in this case are excluded. The necessary elements are simply "stringed" in random order on the racks, like beads on a string. A similar series is "Anga" (IKEA). The distance between the vertical guides determines the width of the selected components, the height of the rack depends on the height of the racks. The racks themselves can be fixed either to the floor and wall, or to the floor and ceiling. In the first case, you can perfectly arrange the rack not only along the wall, but also perpendicularly, in the second - the only possible way of placing the composition - around the perimeter of the room.
Furniture, assembled from the elements of the model program, can include even a small cabinet. Modular composition NOVAcia from Nova
The rack, made to order, optimally takes into account the layout features. Furniture, built on the basis of Studio 38 and Loft systems from Mr.Doors
Racks of the same design, butdecorated with the use of materials of different colors and finishes, are completely different. The system of shelving on the basis of the program Purion from HülstaThe individual columns of the rack The rear wall of the rack does not carry a structural load, so it can be abandoned, especially if the furniture is also intended to be used as a partition. The modular design, with all the convenience of designing, is not always able to "fit" into the area allocated for it. After all, the dimensions of the elements are set by the manufacturer once and for all. And if, for example, you need a wall-to-wall rack, then the products suitable for the function may simply not fit the width. Or the case is more rare, but therefore more complex: a variable height rack is required for the attic or for installation under the stairs. In such situations it is necessary to make a shelving on an individual project. For this you can contact the company engaged in the production of built-in furniture, or use an individual program of firms that offer ready-made shelving. So, for example, if you need aluminum racks, they will be found in programs Loft (Mr.Doors) and Liberty (Stanley). However, in the assets of factories that produce cabinet furniture, there are rulers that assume almost the same freedom of choice: it is Basic 3D or Basic XT from BoConcept; Purion from Hülsta and Partout from Gwinner (Germany); Lur from Nueva Linea (Spain). Of course, in the catalogs of these companies there are already ready models built on the basis of the mentioned programs. But this is only a demonstration of opportunities. If you implement all the proposals, the same racks, designed using different materials in the decoration of facades and partitions, will be completely different from each other. True, at least approximately to estimate the cost of such an exclusive rack, not having on hand a complete drawing, alas, will not succeed. Too much depends on the selected elements and materials. 
Orient in the numerous books will allow built-in lamps or lamps-clothespins. The system of shelves "Billy" from IKEA
Original in form and composition of the rack can be obtained, even using almost identical modules. Shelf from D-light elements from Domestik, Italy
As a rack, you can consider the shelf system. Book Shelves from Lago (Italy)
What room do you need a rack for?
The living room is most often in the living room rackIt is used as an alternative to the traditional "wall". In this case, it is optimal to stop on shelves of unequal width, located at different heights. This way it will be more convenient to organize different things. To make the shelf not too boring, we advise part of the shelves to be partially or completely covered with swinging or sliding doors of contrasting color. If you need an additional storage system in a spacious living room, the rack can be placed perpendicular to the wall, using it as a partition separating the functional zones - for example, a soft group and a canteen. Children's room can accommodate three functional zones at once, but place all necessary conditions on an area of 8 m extremely difficult. Therefore, the rack can be used not only for storing toys, books, disks, but also as a partition. And why not turn it into a bed head? If the child is small, then preference should be given to bright colors and natural materials: wood, veneered or laminated chipboard. Metal and glass are more suitable for a teenager's room. Cabinet The area of the cabinet is usually small. In addition, it is often combined with a library. So the only possible way to place shelves in height under the ceiling is along the walls. In this case, it is not superfluous to highlight the shelves. It can be thought through at the stage of ordering the rack, and you can save and use small fixtures-clothespins. To get books help miniature ladders. They can be used as additional chairs. Useful information from WDay.ru
Rack Granemo, IKEA, 9 990 r.Where to buy a rack:
- Boconcept,
- IKEA,
- Mr. Doors,
- MBTM,
- furniture factory Nova
- furniture factory "Dyatkovo"
By the way: Since April, 1st in company Mr.Doors introduced a preferential tariff for night delivery (22.00 - 5.00) - just 1% of the order price (daily delivery from 5.00 to 22.00 - 5%) .In IKEA there was a new series of shelves. Granema from spruce wood, painted white - ideal for a country house or an interior in the style of Provence.
