Design: Nikolay Novikov. Photo: Ekaterina Morgunova.Wooden shelvesMaterials:20 mm thick oak furniture boards, 16 furniture screws, PVA glue, water-based wood stain, black and mahogany, wood varnish, furniture plugs, hanging fasteners, 3 pcs. Tools: hacksaw, chisel, drill, wood drill bits No. 5.5 and 6.5, hammer, screwdriver, sandpaper. Description of work: 1. Saw out 4 pieces measuring 710 x 140 mm and 4 pieces measuring 450 x 140 mm from oak boards. Mark and drill holes for the screws. 2. Using furniture screws, assemble the two rectangular parts of the shelf. 3. Stepping back 200 mm from the lower left corner of the top shelf up and to the right, make a cut to the middle (from the back side). 4. In the same way, to the middle (only from the front side), saw another rectangular part, stepping back from its upper right corner by 200 mm to the left and down. The parts should fit one into the other. 5. On the back side of the three vertical parts of the shelf, drill recesses of the required diameter, remove the wood between the recesses with a chisel. Screw in the fasteners. 6. Disassemble the rectangular parts of the shelf. Cover them with black stain. After drying, treat the surface with sandpaper. Cover with mahogany stain, and then varnish. Assemble the shelf. Grease the sawn areas with PVA glue and connect the parts. Cover the screw heads with plugs.Wooden shelf with own hands23456Read more: