Photo by Vitaly Nefedova. Author of the project Victoria LeeDIY folding tableIn a smallIt can be difficult to organize a workspace in an apartment. We suggest constructing a multifunctional folding table. When folded, it can be used for any household chores. When unfolded, it is just right for making a pattern. The tabletop, consisting of two parts, slides forward. It is supported by console brackets fixed to the wall. And to get a vertical panel (for example, for attaching sketches), it is lifted and rested on the wall.

• Photo 1, 2. Two equally sized furniture panels and four balusters are painted white. The height of the table can be pre-adjusted to the desired height, respectively, sawing balusters.
• Photo 3. Door hinges are attached to the tabletops with screws at a distance of approximately 20 cm from the edge.

• Photo 4, 5. Two foam ceiling tiles cut to the size of the tabletop (butt to the hinges). Then the tiles are covered with a thin layer of glue and neatly fixed. It is advisable to use PVA glue to avoid corrosive foam.
• Photo 6. Brackets screws are screwed to the wall.

• Photos 7, 8, 9. Each bracket should be 10 cm from the edge of the tabletop when the wall is lowered on them.

Comments

comments

Also read:

Design project of a country house from the studio Sundukovy Sisters The interior of a small living room To be warm in winter: blankets and pillows Table setting for the holiday of March 8 Paint, varnish and enamel on an oil basis: we make a choice Cacti and care for them