Author of the project: Elena Zotova To work you will need: poster, clockwork, hands, a bicycle tire, a dial printed on the printer, a pencil, white and black acrylic paint, tape measure, brush, perforator, saw, chipboard, silicate and PVA glue.
Decoration Clock
Decor for wall clocks
- Photo 1, 2. The future "frame" (bus) and the poster are combined to select the most suitable fragment of the image. On the poster make appropriate marks, excess cut off. Then the "pattern" is transferred to the chipboard.
- Photo 3, 4. According to the "pattern", a rectangle is sawed out of the chipboard using a saw.
- Photo 1, 2. The poster, dipped on the back side, is glued to the chipboard using PVA-glue.
- Photo 3. A black acrylic paint is applied to the bicycle tire with a brush.
- Photo 4. From the dial in a random order cut out the numbers and attached with a silicate adhesive.
- Photo 1. From the dial in random order, cut out the numbers and attach with a silicate adhesive.
- Photo 2. A small hole is drilled in the workpiece. It is necessary to install the clockwork and arrows.
- Photo 3.The tire is lightly (the brush should be almost dry) tinted with white paint. Thanks to this, the "frame" will look a little shabby, and its texture will become more obvious. Then the blank is inserted into the tire.
- Photo 4. The work is completed.
